Sponsored Content: Siglent SDS5000X oscilloscopes tackle challenges of embedded circuit design

The newly introduced Oscilloscope series SDS5000X is available with a bandwidth up-to 1 GHz, a maximum sample rate of 5 GS/s, and a maximum acquisition memory of 250 Mpts. It features powerful data analysis and measurement features and is well equipped to solve the complex challenges of embedded circuit design.

The SDS5X includes a full digital trigger with qualified and zone triggering to help isolate faults more quickly. This technique enables a highly sensitive and accurate trigger control. It also includes a new low noise front end that delivers an industry leading vertical sensitivity of 500 µV/div, making the SDS5X a perfect tool for debugging small signals. SIGLENT put a lot of efforts into usability, the result is a clearly structured user interface layout on a large 10.1” touch screen, that features gesture operation.

All make the scope extremely easy-to-use and shortens the “get-used-to”-time to the minimum. For multi-domain analysis, the oscilloscope has hardware-based frequency analysis utilizing up-to 2 Mpts for the FFT-calculation. This deep memory FFT provides higher frequency resolution than many other FFT based systems. For serial bus troubleshooting, the SDS5X includes free decoding on all low speed serial buses (RS232, CAN, LIN, and I2C) and can be upgraded with decoding kits for more specialized buses (CAN-FD, I2S, FlexRay and MIL1553B) at any time.

Moving into the GHz-range, was one of the big and important steps in the history of Siglent. This new flagship oscilloscope was also presented to the European customers at the Embedded World exhibition in Nuremberg and attracted a lot of interested customers.

Beside showcasing the new product, the whole booth at the Embedded World was designed to present Siglent’s solutions for the daily tasks of embedded and IoT developers. Of course, presenting the products is the core task for a T&M manufacturer at any exhibition, but finally the customers don’t need a single box, the customer need a solution for a certain task. Therefore, every platform was organized by a different application topic and showed the different products solving the measurement task.

For everyone who is wondering, who is Siglent and what they are doing? Siglent Technologies began developing digital oscilloscopes in 2002. After 15 years of research and development, the product portfolio includes digital oscilloscopes with Bandwidth that reach from 50 MHz and now up-to 1GHz, handheld oscilloscopes with or without isolated input channels, function/arbitrary waveform generators also in a wide variety of bandwidth’ (10MHz to 500MHz), DC power supplies for the lab, digital multi-meters with 4.5 to 6.5digits, spectrum analyzers and RF signal generators with a maximum Bandwidth of 3.2GHz and other general test instruments. Siglent is continuously expanding its range of products. The plan for 2019 is to release more than 3 new products and extend the current portfolio on one hand with higher performance instruments and on the other hand with a completely new product group.

Over the time, Siglent has grown up to a global leader in electronic test and measurement equipment. Its products combine innovative features and functionality with a strong commitment to quality and performance.

Siglent currently has three main offices around the globe. First, the Headquarter in Shenzhen, China. All developments and productions are done there. There are over 300 people employed. More than 100 engineers working in several departments including hardware, software, industrial design, test, and the advanced equipment environmental lab, as well as a highly qualified management team and other technical professionals

The subsidiaries in America and Europe were founded in 2014. The American office is located in Solon, Cleveland/OH and since the opening of the office, it has grown continuously to now 6 people. They work on local sales, service and support. The European office is located in Hamburg/Germany and was managed remotely from China. Since October 2018 Siglent started to employ local staff. In the meantime, there are three employees taking care about Service & Support, Sales and Marketing. The main goal is to deliver high quality service to customers and sales partners and continuously improve and optimize the performance. All repairs and later also factory calibration will be done locally at the center of Europe.

The whole European sales is done by authorized Distributors. The advantage for the customer is, that the next Siglent sales partner is typically not far away and all pre-sales and lots of after-sales activities can be done in the local language.

To find your Siglent distributor you can refer to our website www.siglenteu.com -> How To Buy.

Contact details

SIGLENT TECHNOLOGIES GERMANY GmbH
Liebigstr. 2-20
22113 Hamburg/Germany
Tel: + 49(0)-819-95946
Info-eu@siglent.com